Pick your right Card Reader for your case

 3.5" Bay or 5.25" Bay

  • All card reader models support High Capacity Memory Card (SDHC 2.0 Compliance) up to 32GB and they are on USB 2.0 interface

  • i18-C68 & i18-C28 are the first USB 3.0 Internal Card Reader that supports SDXC up to 2TB card; and they are on Internal Connected to motherboard onboard USB 3.0 port interface

  • All models support High Definition & or AC97 onboard Audio if applies

  • All card readers are driverless (No driver needed; Plug n Play)

  • Support Win ME/2000/XP/Vista/Win 7& 8, Mac OS X/ V9.2 or higher

3.5" Bay USB 3.0 Internal Card Reader Model# Face Plate USB 2.0 Port USB 3.0 Port IEEE 1394 Port eSATA Port
i18-C68 Black Plastic N/A x 1 N/A N/A
5.25" Bay USB 3.0 Internal Card Reader i18-C28

Black Plastic

HD Audio x 2

x 2  x 1 N/A N/A

3.5" Bay USB 2.0 Internal  Card Reader

Model# Face Plate USB 2.0 Port USB 3.0 Port IEEE 1394 Port eSATA Port

ZE-C68

Black & Silver Plastic x 1 N/A N/A N/A

i18-C38

Black Plastic N/A x 1 N/A x 1

ZE-C88

Black Plastic N/A N/A x 1 x 1

ZE-C118

Black Plastic x 1 N/A x 1 N/A

5.25" Bay USB 2.0 Internal Card Reader

Model# Face Plate USB 2.0 USB 3.0 IEEE 1394 Port eSATA Port

ZE-C98

Black & Silver Plastic x 3 N/A x 1 x 1

ZE-C128

Black Aluminum x 3 N/A x 1 x 1

ZE-C138

Silver Aluminum x 3 N/A x 1 x 1
ZE-C288  Black Aluminum N/A x 2 Fan Controller x2 x 1
ZE-C168 Black Plastic 4 Fan controllers with LCD and Temp display and alarm

All 5.25" Bay card readers come with High Definition Audio port, which is also AC 97 compatible except ZE-C168

Notes:

  • All ports and cables (except USB 3.0 below) are internally connected to motherboard onboard port; you need your motherboard manual to locate the onboard port(s) and all cable header(s) are clearly labeled with relative port/pin

  • USB 3.0 cable connection; all USB 3.0 cable are internal connected 20 pins cable except ZE-C198/ZE-C228/ZE-C268 that are with Type A external connected connector; the cables need to be routed to the back and connect to the back I/O USB ports like picture shown below. ZE-C288/i18-C28/i18-C68/i18-C38 USB 3.0 cable is a 20-pins internal USB 3.0 header that needs to be connected to the onboard USB 3.0 port. Please read your motherboard manual to ensure you have onboard USB 3.0 port or not to choose the right model.

Most of the USB 3.0 connections are resided on the I/O plate at the back of the motherboard, so, the USB 3.0 cable(s) will need to be routed out of the PCI slot and connected to the back of the I/O input. The PCI bracket comes in with the package

  • If your motherboard has the onboard USB 3.0 (20 pins) port, you should consider ZE-C288; i18-C28; i18-C38 & i18-C68 since they all use the internal 20 pins USB 3.0 connector that requires an onboard USB 3.0 port.

   

Go back

About nMedia   Contact Us  Legal Disclaimer

Copyright ©  2004-2014 NMEDIA SYSTEM, INC. All Rights Reserved.