ZE-C288

#1 in the market to support 5.25" Bay Card Reader & Fan Controller

   
Images: 1 , 2
FeatureSpecificationGalleryReviews

Model#  ZE-C288

USB 2.0 Internal Card Reader

5.25" Bay with Black Aluminum Panel

Features

  • Support the latest High Speed / High Capacity Flash Memory Card Up to 32GB (SDHC 2.0 Compliance)
  • All-in-1 card reader and writes CF/MD/SD/MMC/MS/MS_Pro/MS_Duo/xD/SMC; Micro SD/M2/Mini SD can be written by the relative adaptor
  • Support two USB 3.0 ports (Internal header connected to onboard USB 3.0 port)
  • Support all e-SATA External Hard Drive
  • Two fan controllers

  • Internal design fitting into 5.25" drive bay to save the desktop space.
  • Supports Hot-Swapping and Plug and Play function.
  • Support slot-to-slot read/write operation
  • USB Bus powered; no external power required.
  • Support USB V2.0 specification and USB Device Class Definition for Mass Storage, Bulk-Transport
  • Support Win ME/2000/XP/Vista/Win 7 & 8, Mac OS X/ V9.2 or higher
  • Driverless
  • All cables internally connect to motherboard onboard port and 3/4 pins fan

Specifications

  • Two fan speed controllers (Fan wattage support power≤12W)
  • Front All-in-1 6 slots USB 2.0 card reader connects via one 10-pins USB header (require one USB 2.0 onboard header); Transfer rate of Hi-Speed USB 2.0 interface
  • Two Front USB 3.0 ports (require one 20 pins USB 3.0 onboard USB 3.0 header)
  • High Definition Audio headphone and Mic Jacks (require one HD onboard audio port or AC 97 audio onboard port)
  • e-SATA port (require one onboard SATA port)
  • Reader and Writer Support :
  • Support SD/SDHC/Micro Sd (TF) /MMC

  • MS/MS Pro Duo/M2

  • Secure Digital Card,Mini SD, Extreme SD, Extreme III SD,Ultra II SD/xD

  • CF I,CF II,Extreme CF,Extreme III CF,Ultra II CF,HS CF, Micro Drive……

  • Need Adaptor: MS Duo/MS Magic Gate Pro Duo/MS Magic Gate Duo/MS Pro Duo/RS MMC/HS MS Pro Duo/MS Rom/HS MS Magic Gate Pro Duo/HS RS MMC/DV-RS MMC/RS MMC 4.0/T-Flash/Mini SD
Installation Quick Guide
  • Check your BIOS setting to see if you need to "Enable USB Device"
  • Connect SATA cable to your onboard SATA port
  • Connect USB 3.0 Internal cable to onboard USB 3.0 port

 

  • Connect Card Reader to the onboard port
  • Match the pin label (on connector) and your board manual USB connection layout for accuracy
  • Connect fans to the fan power cord and speed connector

  

  • The card reader USB connector is a 4 pins connector, check your motherboard user guide to locate the onboard USB port like below diagram, and match the pin to slot in the 4 pin connector

Internal Cable Headers

Fan Controller Header | Fan Power | USB 3.0 (20pin) | HD Audio | SATA | USB 2.0

Major Reviews

Coming soon

Package Contents

  • ZE-C288 All-in-1 Card Reader
  • SATA cable (Internal)
  • USB 2.0 cable (Internal / 10-pins)
  • USB 3.0 cable  (Internal / 20-pins)
  • Fan Cable & Power Cord (Internal 3/4 pins)
  • Screws
  • User Guide

Go back  Top

About nMedia   Contact Us  Legal Disclaimer

Copyright ©  2005-2013 NMEDIA SYSTEM, INC. All Rights Reserved.